2C Natural Wood Hardwax Oil

Natural Wood 2C hardwax oil – Preserve the Original Look of Light Woods

Achieve a fresh, newly sanded look with Natural Wood 2C harwax Oil, specially formulated for oak, ash, pine, maple, and other light woods. This lightly tinted oil enhances wood’s natural beauty without intensifying yellow tones.

Key Benefits:

• Subtle, natural finish – keeps wood looking fresh and new
•  Strong first-layer protection – durable and long-lasting
•  Easy to apply – simple soak, buff, and wipe process
•  Fast drying – light use after 48 hours, full cure in 5-7 days

See our whole range of 2C oils Here

How to Apply Hozon Finishes 2c hardwax oil & Natural Wood 2c hardwax oil

Preparation

• Ensure the surface is free from old finishes, dirt, and stains.
• For pigmented products: Use max 180-grit sandpaper for best adhesion.
• Mix only the needed amount of oil. Use within 2-3 hours at 20°C.

Application

•  Spread oil using a plastic card, rubber squeegee, roller, or brush.
• Let it absorb for 20-30 minutes, adding more on dry areas.
•  Work in with a nylon pad for even distribution.
•  Wipe off excess with a lint-free cloth or soft polishing paper.
•  Let cure. Apply a second layer for high-wear surfaces.

Extra Steps for Natural Wood 2c hardwax oil

•  Wipe off white streaks for a cleaner finish—or leave them for a light white tint!

Curing Times

•  Natural Line: 14 days before exposure to liquids.
• Sensei Base Oil: Reapply after 24-48 hours.
• 2K Series: Fully cured in 5-7 days.